Home » Speakers » How to Program an Xfinity Remote to a Soundbar

How to Program an Xfinity Remote to a Soundbar

Do you know how to program an Xfinity Remote to a soundbar? If technology makes things smaller, why is your TV remote collection so large it can be seen from outer space? Can we get some kind of coordination, cooperation, or cohesion? Oh, apparently, we can. And it has nothing to do with the New World Order.

Unfortunately, furthering remote control technology is not high on science’s things-to-do list. But there are other ways around this problem. Programming an Xfinity remote to a soundbar is one way to stop being suffocated by a chaotic cacophony of controllers.

What is an Xfinity Remote?

What is an Xfinity Remote

If you are sitting there scratching your head asking yourself, “What’s an Xfinity remote?” you need to get up to speed. Xfinity is a brand of TV remote controllers that have lots of features and are highly programmable.

They were designed to help you find things quicker than ever before. And they even have amazing voice control functionality for the laziest TV watcher.

You can use the voice controls to find channels, search for shows and stuff, and even to make yourself a coffee. Not really, we lied about that last feature, but that would be cool. But, you can use them to alter your TV and screen settings.

And if you program it into your soundbar, you can throw your current remote collection into the sea for the dolphins to enjoy.

Is it Possible to Link an Xfinity Remote to a Soundbar?

It is possible to link an Xfinity remote to a soundbar to simplify your controller needs. Some might say it’s the only route to take for total control and cohesion. There is nothing worse than having one remote for your TV, one for your cable network, and a remote for your sound system. You know that plastic takes decades to biodegrade, right?

There were an estimated 1.6 billion TV sets in the world in 2011. That’s a lot of televisions and a lot of remotes. You do the math. If you learn how to program your Xfinity remote to a soundbar, theoretically, you could be fighting pollution and climate change. All from programing a remote. So, how do you program an Xfinity remote and save marine life at the same time?

How Can I Program my Xfinity to Work with a Soundbar?

Connecting your Xfinity remote to a soundbar is not particularly difficult, but you’ll have to closely follow some simple steps. There are several Xfinity remote models, so some details might be slightly different. However, we will do our best to cover everything.

The first thing you need to do is pair your remote to the TV. You need to press the ‘Setup’ button and keep your finger on it until the LED light turns green. After that, you will need to enter the Soundbar manufacturer’s code. Once the LED flashes two times, you can proceed to test the volume and power button to ensure it’s connected.

Can any Xfinity remote be used?

Yes, all Xfinity remote models are made for this exact reason. Not only can they be programmed to work with your soundbar, but they can also work with any audio/video receiver. It’s also important to know that once you have connected your remote, it will control the speaker volume instead of the TV volume.

Step-By-Step Guide to Programming Your Xfinity with a Soundbar

Step-By-Step Guide

Now we have established that Xfinity remotes work with all manner of soundbars and audio/video receivers, we need to go in-depth. Here is a step-by-step guide to program Xfinity X1 and Xfinity XR-15 model types.

Programming an Xfinity X Remote Control

It’s really simple to program an Xfinity X remote model to your soundbar device. Even if you struggle with technical things, this shouldn’t be too difficult. Just remember that you will need to have the soundbar manufacturer’s code close at hand during this process.

Please follow these steps:

Make your Soundbar the Default Output Receiver

Before you even start connecting or programming anything, make sure that your soundbar is the default output receiver. If you do not change this, the sound will probably continue to come out of your TV’s built-in speakers.

Make sure that you have a connection between your soundbar and TV, which is usually via an HDMI ARC cable or an optical cable. These two need to be connected to move onto the next step.

Press the ‘Setup’ Button on Your Remote

Once you have checked that your TV and soundbar are connected, and it’s listed as the default output, we can move on. Now you need to connect your Xfinity remote to your soundbar. You can do this by pressing the ‘Setup’ button on your remote. You need to keep your finger on the button for a few seconds.

Wait for the LED Light to Turn Green

Once you have held the ‘Setup’ button down for a few seconds, the setup process should be initialized. This will be complete when the red LED turns green. You can find the LED light at the top of your remote.

Enter Soundbar Manufacturer’s Code

After the light turns green, you will need the soundbar manufacturer’s code, as previously suggested. If you are unsure about this, it’s a 5-digit code that should be listed on the device’s spec list. Otherwise, you can click here to find out the specific code of the model. Once you have the code, you can enter it where advised.

Wait for LED Light to Flash Green Twice

After entering the code, you will need to wait until the LED light flashes twice in green. This will be the signal to inform you that the Xfinity remote has been programmed.

Test the Remote Works

After the LED flashes green twice, you are ready to go. All you need to do now is to check that the remote is connected. Try out the power and volume controls to ensure that everything is hunky-dory.

Programming an Xfinity X-15 Remote

If you need to program an Xfinity X-15 remote, it’s very similar to the standard X1 model. But with a few differences. These remotes were made for this purpose, so they are not overly complicated to connect to a soundbar.

Please follow these steps:

Ensure the Soundbar is the Default Output

Once again, similar to the X1 model, you will initially need to ensure your soundbar is the default output device for your TV.

Press A & B Buttons to Initialize Programming

Now that your soundbar is the default output, you need to connect your remote to it. You can do this by pressing buttons A and B simultaneously on your remote. Hold these buttons down for a few seconds, and the programming will be initialized.

Wait Until LED Light Turns Green

Again, keep these buttons pressed down until you see the LED light turn from red to green. It should only take a few seconds, and then programming will be almost complete.

Enter the Soundbar Manufacturer’s 5-Digit Code

You will then once again have to enter the 5-digit soundbar manufacturer’s code to finish off the registration.

Wait for LED Light Flashes

Once you’ve successfully entered the code, you will have to wait for the LED light on the remote to flash twice. And that should be all folks.

Test Your Remote

Your Xfinity X-15 remote should now be programmed. Test the volume and power buttons on the remote to ensure the connection is complete. You are now ready to go.

What Happens if the Remotes Fail to Program?

Remotes Fail

It’s not so difficult to learn how to program an Xfinity remote to a soundbar. It’s very simple because the product was meant for it. But what happens if the remotes fail to program and don’t connect with the soundbar?

If you are sitting there with a puzzled look on your face because the remote doesn’t work, don’t worry. The best line of action in this situation is to type the 9-9-2 code into the remote and hold the ‘Channel Up’ button down for three minutes. When doing this, the soundbar will eventually turn back on, and you can repeat the process of programming from the start.

Not sure which remote to get? Then check out these highly recommended Xfinity Remotes for some great options…

Or are you thinking of getting some superb Speakers?

If so, then check out our in-depth reviews of the Best Wireless TV Speakers, the Best High End Home Theater Speakers, the Best Smart Speakers, the Best Sonos Speakers, the Best 7.1 Home Theater System, the Best Bookshelf Speakers, and the Best Floor Standing Speakers you can buy in 2021.

Also, have a look at our comprehensive Sony HT-S350 Soundbar Review, our Klipsch R-10B Review, our Fluance Signature Series HiFi Review, and our Definitive Technology BP9020 & CS9040 Plus Center Channel Speaker Review for more awesome items on the market.

You might also like our helpful guides on How to Connect a Soundbar to TV Without HDMI or OpticalHow is Surround Sound Different Than Stereo, and Floorstanding vs. Bookshelf Speakers for more useful information.

How to Program an Xfinity Remote to a Soundbar – Final Thoughts

Eradicate the need for several remote controls with the Xfinity remote. Now you have learned how to program an Xfinity remote with a soundbar; you have simplified your whole audio and video experience.

And you’ve also helped climate change and mass pollution at the same time. You may well have already achieved more than Greta Thunberg just by hooking up your remote to your soundbar. That sounds like a very industrious afternoon indeed.

Until next time, happy listening.

Share:

Leave a Comment

Your email address will not be published. Required fields are marked *

About Jennifer Bell

Jennifer is a freelance writer from Montana. She holds a BA in Creative Writing and English, as well as an Associate of Applied Science in Computer Games and Simulation Design.

Her passions include guitar, bass, ukulele, and piano, as well as a range of classical instruments she has been playing since at school. She also enjoys reading fantasy and sci-fi novels, yoga, eating well, and spending time with her two cats, Rocky and Jasper.

Jennifer enjoys writing articles on all types of musical instruments and is always extending her understanding and appreciation of music. She also writes science fiction and fantasy short stories for various websites and hopes to get her first book published in the very near future.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top