Home » Microphone » Top 8 Best Blue Yeti Microphone Stands You Should Buy in 2021 Review

Top 8 Best Blue Yeti Microphone Stands You Should Buy in 2021 Review

The increase in computing power brought new opportunities, both personal and business. But there was one important thing that was lacking. The ability to be able to plug a mic straight into a laptop or computer without using an interface. However, the creation of the USB microphone solved that problem.

They are plug-and-play devices, and therefore, very easy to use. Likewise, they are convenient and open up a whole new world for interviews, podcasts, etc. 

Technological advances

There is no doubt they are an exciting step forward for certain environments. But they are certainly not for everyone or every use. However, they have much to offer in some situations, especially for those that want a plug-and-play option.

But, it is fair to say they haven’t made much of an impression at the high-end of the market. It is unlikely you will find them in recording studios. Quality has something to do with that, of course. Time will tell if companies ever produce USB mics to rival Neumann, Sennheiser, or AKG mics for vocals.

The Blue Yeti

One of the best USB mics available is the Blue Yeti. Made by Blue, they are one of several USB options the company produces. It is also one of the most popular. For recording voice-overs, podcasts, and interviews, it does a very good job.

There are no complaints about its build. It is a well-made mic and quite sturdy and stable. It is stylish, and it looks good. However, if it has a weakness, is it the stand. 

The stand itself is also quite stable and, in some cases, an asset. But it can have a negative effect on the recording. With that in mind, I put together this review of the best Blue Yeti Microphone stands currently on the market.

An Alternative Stand?

Many people seem to agree that it is better to use an alternative mic stand as opposed to what is supplied. I would like to make this observation, though. 

The thread on The Blue Yeti for mounting is ⅝; therefore, you will need to find a stand with that thread. Alternatively, a stand that has an adapter to it. On that basis, let’s take a look at the best stands for your Blue Yeti microphone.

Best Blue Yeti Microphone Stands

Top 8 Best Blue Yeti Microphone Stands for all Budgets in 2021 Reviews

  1. RODE PSA 1 Swivel Mount Studio Microphone Boom Arm – Most Durable Blue Yeti Microphone Stand
  2. InnoGear Microphone Arm Stand – Most Adjustable Blue Yeti Microphone Sand
  3. DISINO Microphone Boom Arm Stand Heavy Duty Spring Mic Stand – Best Heavy Duty Blue Yeti Microphone Stand
  4. Iksee Studio Arm Microphone Stand – Best Basic Blue Yeti Microphone Stand
  5. East Shining Adjustable Microphone Suspension Boom – Best Budget Blue Yeti Microphone Stand
  6. Gator Frameworks Short Weighted Base Microphone Stand – Best Value for the Money Blue Yeti Microphone Stand
  7. Heil Sound PL-2T Overhead Broadcast Boom – Best Balanced Blue Yeti Microphone Stand
  8. Blue Compass Premium Tube-Style Broadcast Boom Arm – Best Blue Yeti Boom Arm Microphone Stand

1 RODE PSA 1 Swivel Mount Studio Microphone Boom Arm – Most Durable Blue Yeti Microphone Stand

This is a mic stand from the Australian company Rode. They are well-known for making quality mics and accessories. But just as importantly, they make products that are rugged and sturdy. An important factor for a mic stand. The PSA1 is one of the most popular microphone stands for Blue Yeti users.

The Build

It is tough and well-built with an all-metal design. The Blue Yeti weighs just over one pound, and this stand can handle up to two and a half pounds. That is more than enough for the mic, the pop filter, and a shock mount. 

It has been designed to handle the weight of the heavier mic. It is supplied with an adapter to convert the thread size from ⅜ to ⅝ so the fitting will be compatible. This makes it one of the most compatible Blue Yeti microphone stands around.

Options for mounting

There are two options for mounting, the desk clamp and the desk-insert installation. The desk mount will allow you to attach it to desktops that are up to 55mm thick. However, the desk insert offers you a little more at 70mm thick. The mount has a dual-axis design. This has a swivel and makes it easy to secure and position the stand in a convenient place.

A good reach

It will allow you plenty of distance in its reach. Up to 33 inches high and 32 inches horizontally. And it will remain stable with a mic attached at those extremes. It is flexible and will rotate through 360 degrees. Velcro cable wraps are included so you can keep your microphone cable secure and out of the way.

Position changes

To change the position of the boom arm, it is designed with a heavy-duty spring mechanism. This makes it secure if you change the position of the arm, and it will stay where you want it. It will not be affected by the weight of the mic.

A good supporting mic stand that is made from good materials and should be considered as one of the Best Blue Yeti Microphone Stands.

RODE PSA 1 Swivel Mount Studio Microphone Boom Arm
Our rating:4.7 out of 5 stars (4.7 / 5)

Pros

  • Well-made using good materials.
  • Good reach and weight holding capacity.

Cons

  • Cables do not have a channel for securing using Velcro ties.

2 InnoGear Microphone Arm Stand – Most Adjustable Blue Yeti Microphone Sand

InnoGear is a company that sells a wide variety of products. So, you can not refer to them as “Mic stand specialists.” I am not sure where this mic stand comes from or who designed and built it, from their website that seems to be a closely guarded secret. Having said that, it is a decent product and worth including.

Specially designed for Blue mics

This is a mic stand that will operate with many of the Blue USB range. Including the Snowball, the Yeti, and the Yeti Nano. It has a very stable build being an all-metal construction with steel tubed arms that are half an inch thick. That gives it a high load-bearing capacity of up to four and a half pounds.

There is a spring-balanced system built-in to give you plenty of secure movement for getting the right position. The cabling is hidden inside the arm and not exposed to view. It is supplied with an ⅝-inch thread connector for fitting the mic.

The Boom Arm

Good adjustments and reach. Horizontally it will give you up to thirty-eight inches. And vertically up to thirty-three and a half inches. The arms will support the weight of a Blue Yeti mic when at full reach. The boom arm is foldable for storage when not in use. There is a swivel action for adjusting the mic position. But there is no locking facility to keep it in a set position.

The Clamps

There are two mounting options. There is a typical desk clamp as well as a desk-insert attachment. Unclipping the mic from your desk is easy. It will attach to all desks that have a lip of over two inches. All this adds up to it being one of the best desk mounted BlueYeti microphone stands you can buy.

InnoGear Microphone Arm Stand
Our rating:4.6 out of 5 stars (4.6 / 5)

Pros

  • Good quality all-metal build.
  • Plenty of adjustment options at a cost-effective price.

Cons

  • The swivel on the boom arm doesn’t lock.

3 DISINO Microphone Boom Arm Stand Heavy Duty Spring Mic Stand – Best Heavy Duty Blue Yeti Microphone Stand

This is a mic stand with a very heavy-duty look about it. I wouldn’t say it was the most visually appealing in some parts of its design, but it certainly does the job.

The Build

It is built with a steel tube frame with springs enclosed internally, which gives it a nice stylish look. It is strong and is not going to bend easily. Although you should ensure that all tightening controls are loosened before adjusting them. 

Whilst the design of the boom arms is attractive; the clamp is a different thing altogether. It has a “vintage” woodworking G-clamp look, with what seems like an antiquated locking control.  

The look seems to contradict the rather stylish steel tubes above it. Nevertheless, it does its job and offers a secure fit. The scissor arm design is fully adjustable and is sprayed using an electrostatic powder. This helps to make it anti-rust.

The Load

It can hold an impressive five pounds in weight. As a result, it’s one of the strongest Blue Yeti microphone stands you can buy. It is fitted with a standard ⅝” thread, so there is no need for an adapter. Two scissor tube arms will extend to about twenty-eight inches. These can be folded away after use.

The Mount

It has clamps that will fit desks up to three inches in depth. The clamp itself has rubber fittings to ensure it doesn’t scratch the desk. The fitting allows the boom arm to be swiveled if necessary. The movement when clamped to the desk is smooth and stable.

A Budget option

Although the price point intimates that this is a budget range product, it is well-made and very secure. It may not have the length and reach of some stands, but it is one of the most secure Blue Yeti microphone stands available.

DISINO Microphone Boom Arm Stand Heavy Duty Spring Mic Stand
Our rating:4.5 out of 5 stars (4.5 / 5)

Pros

  • Well-made with good materials at an attractive price point.
  • Safe and secure fit holding up to five pounds in weight.

Cons

  • Some may need a longer reach.

4 Iksee Studio Arm Microphone Stand – Best Basic Blue Yeti Microphone Stand

This is a basic mic stand with a boom arm that will work with various microphone models. It is a little limited in that it will only operate with microphones that weigh up to 2.86 pounds. That will rule out some but includes the Blue Yeti. On the other hand, it does make this one of the best lightweight Blue Yeti microphone stands available.

The Build

This stand has quite a sturdy all-metal build with its steel frame and iron base. It has a simple design with an internal spring. This allows some adjustments to the position of the mic, either up or down. It also has a 360-degree rotation. The arm is adjustable, so it can be folded away after use. It has a decent amount of reach while retaining its balance.

The Clamp

It can accommodate desktops that are up to 2.2 inches in depth. It is easy to adjust, but in my view, it doesn’t have the most secure fitting. The base plate of the clamp is quite small, and the knob for tightening the clamp is very basic. 

It certainly appears that you might struggle to get a decent amount of pressure to hold a mic in some positions. It does take a reasonable weight of mic for this stand to function correctly. If the mic is very light, it does not apply enough weight for operation.

Some extras

You are supplied with a threaded screw for connecting the Blue Yeti and two foam covers for the mics.

Iksee Studio Arm Microphone Stand
Our rating:4.2 out of 5 stars (4.2 / 5)

Pros

  • Basic boom arm stand with an all-metal build.
  • Adjustable arm with 360-degree rotation.

Cons

  • The clamp is a little vulnerable.

5 East Shining Adjustable Microphone Suspension Boom – Best Budget Blue Yeti Microphone Stand

If you are looking for a budget boom stand for your Blue Yeti, then this from East Shining might be an option.

The Build

This might not be the most aesthetically pleasing stand you will find, but it certainly does the job. It has dual suspension springs placed on each of the boom arms. These act to protect the mic from any unwanted movements or shaking but also increases the mic’s stability. It can support loads of up to four and a half pounds, so it will cope easily with the Blue Yeti.

It is made from Zinc Alloy and has a steel frame. Therefore, the build is strong and sturdy. It has been given an electrostatic powder-sprayed finish. This makes it anti-rust and will ensure it stays in decent condition. The boom arms are lightweight and fully adjustable and can be folded away easily after use.

The Clamp

It has a simple table mounting clamp with a screw tightener. It is easily fitted to a tabletop that has a depth of up to 2.15 inches. The clamp has a lining of a soft sponge material where it makes contact with the table. This is just to protect it from possible scratching. For added protection, there is also a rubber washer.

The Reach

With the two legs combined, it can reach up to twenty-seven and a half inches. It will therefore be able to fit easily into most environments and allow you to get mic angles correct. It comes with an instruction booklet, a plastic clip mic holder, and a ⅝” brass adapter to fit the thread of the Yeti.

A word of caution

You do need to be careful when opening the package this stand will be delivered in. The arms are held together with a simple band. When it is broken, the arms will spring out very forcibly. Best not to have your fingers inside the package when they do.

East Shining Adjustable Microphone Suspension Boom
Our rating:4.4 out of 5 stars (4.4 / 5)

Pros

  • Quite well-built beats basic stand with a decent reach.
  • Cost-effective option.

Cons

  • Some will need a stand with a bit more visual style.

6 Gator Frameworks Short Weighted Base Microphone Stand – Best Value for the Money Blue Yeti Microphone Stand

Now we move away from the boom arm design to a short stand with a compact base. This has a maximum height of just 23 inches, with a boom arm measuring 16 inches.

The Build

The base is quite compact at 4.5″ by 8″ and is made of heavy-duty steel. This will provide it with stability and good balance, so it will not get knocked over easily. Because of its low stature, it offers up the potential for other uses than as a desk mic stand. We will look at that later.

To prevent any rumbling noise that may occur between the base and the desk, it has a non-slip vibration gasket. Another plus point is the integrated cable management. Thus keeping unwanted cables out of the way.

Compact arm extension

For adjusting the position of the short arm, there are some soft rubber knobs. This makes them easier to grip and turn. That feature is not often included but is a nice touch. It takes just a quarter turn to be able to make those adjustments.

At its full extension, the stand is balanced and stable. And even though the Yeti weighs just over one pound, the stand will not topple over. Some people prefer single-section boom arms as they are easier to adjust. That certainly is the case with this stand.

What other uses?

I mentioned earlier that it might have other uses. It occurs to me that this is a good stand for placing on a desk and using your mic with your computer. But it also has other possibilities. 

How about a mic in a home or small recording studio for placing in front of a kick drum? Or for micing up an amp? It is stable and holds a decent weight, and is a good height. As a result, this is one of the most versatile Blue Yeti microphone stands on the market.

Set at a very attractive price point, this has to be considered as one of the best Best Blue Yeti Microphone Stands.

Gator Frameworks Short Weighted Base Microphone Stand
Our rating:4.6 out of 5 stars (4.6 / 5)

Pros

  • Well-built stable mic stand at a great price point.
  • Offers a variety of uses.

Cons

  • Some will prefer a full-size boom.

7 Heil Sound PL-2T Overhead Broadcast Boom – Best Balanced Blue Yeti Microphone Stand

Back to the boom design for this stand from Heil Sound. They are a company based in Illinois and were established in 1966 by Bob Heil. They also manufacture microphones and other accessories, so they ought to know what makes a good stand.

Well laid-out design

They have gone for a simple, uncluttered, but functional design. One of the features is that any cabling for the mic is hidden away. This puts it out of sight, of course, but also prevents any unfortunate accidents. They also make sure the springs are all hidden away internally. That is a feature that many prefer.

The Build

A strong all-metal build ensures it is stable, and the springs we have mentioned offer a perfect balance. The design features removable plates on the top and the back. This allows you to thread through the mic cable. 

It can handle a weight load of up to three and a half pounds. Holding the Blue Yeti stable and in a fixed position is not then a problem. It will take a ⅝” thread.

The Clamp

There is a standard C-clamp mounting system, which may be considered its weak point. The clamp is not part of the stand itself and is included as an extra. And while the stand will hold the mic securely, it is only as secure as the connection to the table or surface.

The clamp will attach the stand to a table, but it does not feel as secure as some. Furthermore, the clamp has no padding, so it could scratch any surface to which it is attached. You can insert your own padding, but then the clamp tends to move around on the surface.

Not the cheapest around, and we remain unconvinced about the fitting. The boom arm is nicely designed and works well. The same cannot be said for the clamp.

Heil Sound PL-2T Overhead Broadcast Boom
Our rating:4.4 out of 5 stars (4.4 / 5)

Pros

  • Nicely designed with good materials.
  • Cabling and spring systems are hidden away out of sight.

Cons

  • The clamping system is inefficient and can mark your desk.

8 Blue Compass Premium Tube-Style Broadcast Boom Arm – Best Blue Yeti Boom Arm Microphone Stand

Who should know what is required to make a great stand for the Yeti? You would think it would be the company that made it. This is Blue’s first attempt at a mic stand.

The Build

It features a strong and stable tube-style design made from aluminum. This allows the springs and the cabling to be kept safely out of the way and out of sight. Cable management is important with mics that are used in enclosed spaces. It is easy to trip over a cable and send the mic crashing to the floor.

Needless to say, it is designed to hold the weight of the Yeti. It will hold any mic up to 2.4 pounds in weight.

Further design features

It allows you to complete a 360-degree rotation and a fully adjustable boom. You can therefore get the positioning exactly how you want it.

The friction hinges tighten by hand and give you a quiet and smooth operation. It is compatible with all the standard shock mount fittings.

Clamping

They have used a C-clamp system. Once again, if there is a weak point, it is the clamping system. It is a little bit insecure and could damage the surface you attach it to.

This stand comes with a twenty-foot XLR cable and a pop filter. Both are more than useful additions. Furthermore, it is one of the most affordable Blue Yeti microphone stands on the market.

Blue Compass Premium Tube-Style Broadcast Boom Arm
Our rating:4.4 out of 5 stars (4.4 / 5)

Pros

  • Good build quality with plenty of adjustments and 360-degree rotation.
  • Cabling and Springs are hidden in the arms.

Cons

  • Clamping is not as secure as it might be.

Best Blue Yeti Microphone Stands Buying Guide

Best Blue Yeti Microphone Stands Buying Guide

Although often overlooked, the stand is an important piece of equipment for a microphone. An inefficient stand can have several effects that are not what you need when trying to get a decent recording. 

Everyone’s requirements will differ slightly. So, the first thing you need to do is decide what sort of stand you need. There are a couple of options.

Stability

The stand must be stable to be able to hold the mic. That means not only supporting its weight but also having good adjustments. You will need to be able to get the mic in exactly the right place.

What sort of stand?

Do you want a boom arm stand that will give you plenty of room? Or do you prefer a desk-mounted stand? The boom will give you the reach and the room, but it can have its stability problems. A desktop mic might incur the same problems that the Yeti has with its built-in stand.

Before you buy

After deciding, but before you buy, you need to make sure there’s enough of an overhang from the edge of the desk. If there is none, most boom arm mics cannot be attached.

Budget

None of the stands we have looked at are particularly expensive. You will be able to get a good stand for a reasonable investment.

Looking for a Great Microphone or Mic Accessories?

We can help you with that. Check out our in-depth reviews of the Best Microphone Stands, the Best Live Vocal Mics, the Best Interview Microphones, the Best Computer Microphones, the Best Cheap Microphone Under $50, the Best Microphones For YouTube, the Best USB Microphones you can buy in 2021.

And if you are after more awesome Blue microphone products, have a look at our comprehensive Blue Snowball USB Microphone Review, our Blue Yeti X Review, our Blue Snowball iCE Review, our Blue Yeti USB Mic Review, and our Blue Baby Bottle Review for more amazing items currently on the market.

What are the Best Blue Yeti Microphone Stands?

Not being a great fan of boom arm stands, I would go for a stable short weighted base stand. I would choose the…

Gator Frameworks Short Weighted Base Microphone Stand 

Well-made, safe and secure, it is solid enough to do what I need. But it also has plenty of potential for use in other recording applications. My choice for the Best Blue Yeti Microphone Stand.

Until next time, let yourself be heard.

Share:

Leave a Comment

Your email address will not be published. Required fields are marked *

About Jennifer Bell

Jennifer is a freelance writer from Montana. She holds a BA in Creative Writing and English, as well as an Associate of Applied Science in Computer Games and Simulation Design.

Her passions include guitar, bass, ukulele, and piano, as well as a range of classical instruments she has been playing since at school. She also enjoys reading fantasy and sci-fi novels, yoga, eating well, and spending time with her two cats, Rocky and Jasper.

Jennifer enjoys writing articles on all types of musical instruments and is always extending her understanding and appreciation of music. She also writes science fiction and fantasy short stories for various websites and hopes to get her first book published in the very near future.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top